Monday to Thursday 7:30–16:30 · Friday 7:30–15:00
Aumon bottom rail, 90° bend and swivel pulleys for the corner sliding gate, the one that turns at the corner and continues along the other wall. The pulleys are spring-loaded with double bearings to take the bend smoothly. Galvanised steel, in Icod de los Vinos and with delivery across Tenerife.
Add what you need and send us your order. Your order is saved even if you change page, so you can combine several products and send it all at once.
| Part | Groove | Sizes | Part weight | Max. load | Add to order |
|---|---|---|---|---|---|
| 3 m straight bottom rail Ø16 groove | Round Ø16 | 3000 mm · 3 mm thick | 4.50 kg | Gate up to 400 kg | |
| 3 m straight bottom rail Ø20 groove | Round Ø20 | 3000 mm · 3 mm thick | 5.32 kg | Gate up to 500 kg | |
| 90° rail bend Ø16 groove | Round Ø16 | 500 mm radius · 627.5 × 627.5 mm | 1.53 kg | Gate up to 400 kg | |
| Ø80 swivel pulley Ø16 groove | Round Ø16 | Ø78 mm wheel · M12 axle · 6201 2RS bearing | 1.41 kg | 125 kg per pulley | |
| Ø80 swivel pulley Ø20 groove | Round Ø20 | Ø78 mm wheel · M12 axle · 6201 2RS bearing | 1.33 kg | 125 kg per pulley |
No sizes match those filters. Ask us on WhatsApp.
Manufacturer's data. We only have the bend with a Ø16 groove, so on a corner gate fit Ø16 rail, bend and pulleys. The pulley load is per unit; the rail and bend load is the maximum gate weight.
It's an articulated sliding gate that turns a corner: the leaf moves along the bottom rail, goes round a 90° bend and continues along the other wall. It's used when there's no room for the gate to slide in a straight line.
Straight bottom rail for the straight runs, the 90° bend for the corner and swivel pulleys under the leaf. All parts must have the same groove, so with the Ø16 bend the rail and pulleys are also Ø16.
We only stock the Ø16 bend. We have the Ø20 rail and pulley for straight runs on heavier gates, as that rail takes up to 500 kg.
Each swivel pulley takes 125 kg. The Ø16 rail and the bend take gates up to 400 kg, and the Ø20 rail up to 500 kg. Spread the leaf weight across the pulleys it has.
They're welded to the leaf and are spring-loaded to adapt to irregularities in the rail, with double bearings. The rail and bend are bolted to the floor through their slotted holes.
Aumon recommends checking the rail's anchoring and alignment according to the gate weight: every 11,900 cycles up to 200 kg, every 7,200 up to 400 kg and every 5,300 up to 600 kg.
Yes. We deliver across the island from our warehouse in Icod de los Vinos and also ship to the other islands. If you prefer, you can collect it from the warehouse.
Tell us the gate's travel and weight and we'll prepare the rails, bend and pulleys together with the rest of the hardware and the steel.
