Gear racks for motorised sliding gates in Tenerife

It's fixed along the motorised sliding gate. The motor pinion meshes with the rack's teeth and moves it to open and close the gate. All the ones we have are module 4.

1018 mm steel-cored nylon rack, the 338.5 mm short end of the same type to complete the run, and 1000 mm adjustable galvanised steel 30x12 rack. The manufacturer also has the 2000 mm adjustable one; if you need it, ask us.

The nylon one is black polyamide 6 with 10 % glass fibre, with a 10x10 mm steel core inside, and the manufacturer recommends it for gates up to 500 kg. The adjustable one is galvanised S235 steel, 30 mm high and 12 mm thick.

It has fixings on the underside that are bolted to the gate: 6 on the 1018 mm length and 2 on the short end. With the fixing, the overall height is 59.5 mm.

It has 3 slots (elongated holes) 452 mm apart, which let you adjust the height relative to the pinion. It's fixed with a DIN 933 M8x25 bolt and Ø20 spacer. The fixing bolt isn't included; ask us if you need it.

Yes, you can combine all the sliding gate hardware with tubes, profiles or sheet in the same order.

Yes. We deliver across the island from our warehouse in Icod de los Vinos and also ship to the other islands. If you prefer, you can collect it from the warehouse.