¿Cómo se ponen las tapas plásticas?

Se ponen a presión en el extremo del tubo, sin soldar ni pegar. Las cuadradas, las rectangulares y las redondas de interior se meten dentro del tubo; las redondas de exterior encajan por fuera.

¿Qué diferencia hay entre la redonda de interior y la de exterior?

La de interior se mete dentro del tubo y queda enrasada. La de exterior encaja por fuera y cubre el borde del tubo.

¿Qué medida necesito?

La medida exterior del tubo. Por ejemplo, un tubo cuadrado de 40 × 40 lleva la tapa de 40 × 40, y un tubo redondo de 40 mm, la de Ø 40.

Sí. Repartimos en toda Tenerife y enviamos a otras islas. También puedes recogerlas en nuestro almacén de Icod de los Vinos.

Plastic tube caps in Tenerife

Plastic caps to close off the end of metal tubes without welding: square from 16 × 16 to 80 × 80 mm, rectangular from 15 × 30 to 60 × 120 mm and round from Ø 16 to Ø 50 mm, internal or external. In Icod de los Vinos, with delivery across Tenerife.

Square and rectangular
Round internal and external
33 sizes
Delivery across Tenerife

View sizes WhatsApp 638 79 86 98

Sizes and order

Add what you need and send us your order. Your order is saved even if you change page, so you can combine several products and send it all at once.

Search size

Plastic cap sizes
Type	Size (mm)	Fitting
Square	16 × 16	Push-in
Square	20 × 20	Push-in
Square	25 × 25	Push-in
Square	30 × 30	Push-in
Square	35 × 35	Push-in
Square	40 × 40	Push-in
Square	45 × 45	Push-in
Square	50 × 50	Push-in
Square	60 × 60	Push-in
Square	80 × 80	Push-in
Rectangular	15 × 30	Push-in
Rectangular	20 × 40	Push-in
Rectangular	20 × 50	Push-in
Rectangular	30 × 20	Push-in
Rectangular	30 × 40	Push-in
Rectangular	30 × 50	Push-in
Rectangular	30 × 60	Push-in
Rectangular	40 × 50	Push-in
Rectangular	40 × 60	Push-in
Rectangular	40 × 80	Push-in
Rectangular	50 × 100	Push-in
Rectangular	60 × 120	Push-in
Round internal	Ø 16	Push-in
Round internal	Ø 20	Push-in
Round internal	Ø 25	Push-in
Round internal	Ø 30	Push-in
Round internal	Ø 40	Push-in
Round internal	Ø 50	Push-in
Round external	Ø 20	External
Round external	Ø 25	External
Round external	Ø 30	External
Round external	Ø 40	External
Round external	Ø 50	External

The size is that of the tube the cap goes on. Square, rectangular and round internal caps push into the tube; round external caps fit over the outside. All fit without welding.

Services

Everything in one orderCombine the caps with the tubes, profiles and the rest of the material in a single order.
Delivery across the islandWe deliver to your site or workshop, and ship to the other islands.
Warehouse collectionOver 1,000 m² in Icod de los Vinos.
Expert adviceTell us the tube size and we'll tell you which cap fits.

Frequently asked questions about plastic caps

How are plastic caps fitted?

They push-fit onto the end of the tube, without welding or gluing. Square, rectangular and round internal caps go inside the tube; round external caps fit over the outside.

What's the difference between round internal and round external?

The internal one goes inside the tube and sits flush. The external one fits over the outside and covers the edge of the tube.

What size do I need?

The outside size of the tube. For example, a 40 × 40 square tube takes the 40 × 40 cap, and a 40 mm round tube, the Ø 40.

Do you ship?

Yes. We deliver across Tenerife and ship to the other islands. You can also collect them from our warehouse in Icod de los Vinos.

Need plastic caps?

Tell us the tube size and quantity, and we'll get back to you as soon as possible.

Request a quote Call 922 12 12 23