Monday to Thursday 7:30–16:30 · Friday 7:30–15:00

Nylon wall plugs in Tenerife

TN4S polyamide 6 nylon wall plug, which expands in 4 directions and doesn't turn when tightened. Suitable for both solid and hollow materials: concrete, stone, solid brick, hollow brick or block. For fixing gates, railings, brackets, shelving, signs or sanitaryware. In Icod de los Vinos, with delivery across Tenerife.

  • Expands in 4 directions
  • For solid and hollow
  • From 6 × 30 to 12 × 60
  • Delivery across Tenerife
Taco de nylon TN4S de expansión en 4 direcciones

Sizes and order

Add what you need and send us your order. Your order is saved even if you change page, so you can combine several products and send it all at once.

Nylon wall plug sizes
Size (mm)Drill bit (mm)Min. depth (mm)BoltUnits per boxAdd to order
6 × 30640Ø4 to Ø5100
8 × 40850Ø4 to Ø6100
10 × 501060Ø6 to Ø850
12 × 601270Ø8 to Ø1025

The size is the plug diameter by its length. The drill bit is the same diameter as the plug. The depth is the minimum hole depth. The screw is the recommended wood screw or coach screw diameter. Units per box according to the manufacturer. The plug is marked with the drill bit, depth and screw. Operating temperature from -40 to 70 ºC. Manufacturer's data.

Maximum recommended load for nylon wall plugs

Load in kg in all directions, for a single plug with the stated screw. Manufacturer's values.

Maximum recommended load
Wall plugBoltConcreteSolid brickHollow brick15 mm plasterboard
6 × 30Wood screw Ø561 kg48 kg39 kg34 kg
8 × 40Wood screw Ø6170 kg104 kg20 kg36 kg
10 × 50Coach screw Ø8256 kg160 kg48 kg35 kg
12 × 60Coach screw Ø10394 kg104 kg54 kg—

The screw length must be what you're fixing, plus the length of the plug, plus 5 mm for the tip.

How to fit the nylon wall plug

First, drill with a bit the same diameter as the plug and to the depth in the table. In concrete use hammer action; however, in hollow brick and plasterboard, drill without hammer. Then clean the dust out of the hole and push the plug in to the edge. Finally, tighten the screw without overdoing it, especially in hollow materials.

Services

  • Everything in one orderCombine the wall plugs with the screws, drill bits and the rest of the fasteners in a single order.
  • Delivery across the islandWe deliver to your site or workshop, and ship to the other islands.
  • Warehouse collectionOver 1,000 m² in Icod de los Vinos.
  • Expert adviceTell us where you're going to fix and what weight, and we'll tell you which wall plug suits you.

Frequently asked questions about nylon wall plugs

What walls is the TN4S nylon wall plug suitable for?

In solid materials such as concrete, stone or solid brick, and hollow ones such as hollow brick or block. It can also be used in plasterboard, although it holds less.

Which drill bit do I need?

A drill bit the same diameter as the plug: 6 for the 6 × 30, 8 for the 8 × 40, and so on. We have drill bits in our warehouse.

Which screw do I use with each wall plug?

The 6 × 30 takes a 4 to 5 mm wood screw, and the 8 × 40 a 4 to 6 mm one. The 10 × 50, on the other hand, takes a coach screw of 6 to 8 mm and the 12 × 60 one of 8 to 10 mm.

What length of screw do I need?

The thickness of what you're fixing, plus the length of the plug, plus 5 mm for the screw tip.

How much weight does it take?

It depends on the plug, the screw and the wall. The load table shows the manufacturer's values: in concrete, from 61 kg for the 6 × 30 to 394 kg for the 12 × 60.

Do you ship?

Yes. We deliver across Tenerife and ship to the other islands. You can also collect them from our warehouse in Icod de los Vinos.

You may also be interested in

Need nylon wall plugs?

Tell us the size and quantity, and we'll get back to you as soon as possible.