Monday to Thursday 7:30–16:30 · Friday 7:30–15:00

MS polymer adhesive sealant in Tenerife

Professional MS polymer adhesive and sealant for bonding, mounting and sealing concrete, brick, wood, PVC, glass, ceramics or aluminium. For indoor and outdoor use, in white, grey, black and clear. In Icod de los Vinos, with delivery across Tenerife.

  • Adhesive and sealant
  • 290 ml cartridges
  • White, grey, black and clear
  • Delivery across Tenerife
Polímero MS adhesivo sellador en cartucho de 290 ml

Sizes and order

Add what you need and send us your order. Your order is saved even if you change page, so you can combine several products and send it all at once.

MS polymer: colours
ColourCartridge (ml)Units per boxAdd to order
White29012
Grey29012
Black29012
Clear29012

Takes loads up to 150 kg/10 cm² and stretches up to 300 %. Contains no solvents, isocyanates or silicones, doesn't slump in vertical joints and can be painted and sanded. Applied with a standard silicone cartridge gun. Manufacturer's data.

MS polymer technical data

Manufacturer's values for MS-PR.

Technical data
FeatureValue
Skin formation25 min
Curing speed2 to 3 mm per day
Application temperature+5 to +30 °C
Operating temperature-40 to +90 °C
Hardness35 to 40 Shore A
Tensile strength2 to 2.3 MPa
Elongation at break200 to 300 %
Volume changeLess than 1.5 %

Skin formation and curing measured at 23 °C and 50 % relative humidity.

Cartridge yield

Metres of joint sealed with one 290 ml cartridge. Ideally the joint should be twice as wide as it is deep, and 6 to 20 mm wide.

Yield per cartridge
Joint (width × depth, mm)Metres per cartridge
6 × 68,3
10 × 65
12 × 64,2
10 × 103
15 × 82,5
20 × 101,5
20 × 200,75

Services

  • Everything in one orderCombine the polymer with the fixings and the rest of the material in a single order.
  • Delivery across the islandWe deliver to your site or workshop, and ship to the other islands.
  • Warehouse collectionOver 1,000 m² in Icod de los Vinos.
  • Expert adviceTell us what you want to bond or seal and we'll tell you whether the polymer will work.

Frequently asked questions about MS polymer

What is MS polymer for?

For bonding, mounting and sealing. It's suitable for expansion joints, sealing silos, tanks and containers, and for mounting kitchen units, panels and structures subject to vibration.

Can it be used outdoors?

Yes. It withstands UV rays, rain and extreme temperatures without discolouring, from -40 to +90 °C.

Can it be painted?

Yes, it can be painted and sanded with most epoxy, polyurethane and acrylic paints.

How long does it take to dry?

It forms a skin in about 25 minutes and cures 2 to 3 mm per day. If you're bonding something heavy, it's best to support it until it cures.

Do you ship?

Yes. We deliver across Tenerife and ship to the other islands. You can also collect it from our warehouse in Icod de los Vinos.

You may also be interested in

Need MS polymer?

Tell us the colour and quantity, and we'll get back to you as soon as possible.