Monday to Thursday 7:30–16:30 · Friday 7:30–15:00
TFE direct-fix screw anchor with hex head and washer, for high loads in cracked and non-cracked concrete. It screws straight into the concrete, with no wall plug, and can be removed. ETA approved. In Icod de los Vinos, with delivery across Tenerife.
Add what you need and send us your order. Your order is saved even if you change page, so you can combine several products and send it all at once.
| Size (mm) | Drill bit (mm) | Key | Max. tightening torque (Nm) | Units per box | Add to order |
|---|---|---|---|---|---|
| Ø8 × 80 | 8 | SW 13 | 20 | 25 | |
| Ø8 × 120 | 8 | SW 13 | 20 | 25 | |
| Ø10 × 80 | 10 | SW 15 | 30 | 50 | |
| Ø10 × 120 | 10 | SW 15 | 30 | 25 | |
| Ø12 × 80 | 12 | SW 18 | 50 | 25 | |
| Ø12 × 130 | 12 | SW 18 | 50 | 25 |
No sizes match those filters. Ask us on WhatsApp.
The size is the diameter by the length of the screw. The drill bit is the same diameter as the screw and the spanner size is the size of the hex head. Galvanised carbon steel. Units per box according to the manufacturer. Manufacturer's data.
The TFE can be installed at two depths. At standard depth it takes more load and at reduced depth you can fix thicker parts.
| Size | Depth | Hole (mm) | Min. concrete thickness (mm) | Max. fixture thickness (mm) | Tension, non-cracked (kN) | Tension, cracked (kN) |
|---|---|---|---|---|---|---|
| Ø8 × 80 | Standard | 75 | 100 | 15 | 8,41 | 5,88 |
| Ø8 × 80 | Reduced | 60 | 100 | 30 | 4,48 | 3,14 |
| Ø8 × 120 | Standard | 75 | 100 | 55 | 8,41 | 5,88 |
| Ø8 × 120 | Reduced | 60 | 100 | 70 | 4,48 | 3,14 |
| Ø10 × 80 | Reduced | 65 | 100 | 25 | 6,26 | 4,38 |
| Ø10 × 120 | Standard | 95 | 135 | 35 | 12,85 | 8,99 |
| Ø10 × 120 | Reduced | 65 | 100 | 65 | 6,26 | 4,38 |
| Ø12 × 80 | Reduced | 90 | 120 | 5 | 10,35 | 7,24 |
| Ø12 × 130 | Standard | 120 | 170 | 25 | 17,87 | 12,51 |
| Ø12 × 130 | Reduced | 90 | 120 | 55 | 10,35 | 7,24 |
The loads are the maximum recommended by the manufacturer for structural applications, with safety factor included. 1 kN is about 100 kg. The Ø10 × 80 and Ø12 × 80 are only installed at reduced depth.
Drill with a bit of the same diameter, blow out and clean the hole, and screw the anchor through the part. The thread is cut into the concrete as it's installed, so no wall plug is needed.
Yes, it's approved for cracked and non-cracked concrete. The table shows the maximum load for both cases.
Yes, it can be removed and leaves the surface clean, with nothing sticking out.
The TFE screws straight into the concrete and can be removed. The MTA anchor is an expansion anchor with a nut and is only suitable for non-cracked concrete.
Yes. We deliver across Tenerife and ship to the other islands. You can also collect them from our warehouse in Icod de los Vinos.
Tell us the size and quantity, and we'll get back to you as soon as possible.
